Tungsten carbide drawing die is a method of making molds. According to the needs, through product design and processing, products suitable for their use can be produced. Then how are the specifications set for the product?
(1) Tungsten carbide drawing die processing dimensions and locking screws
When the Tungsten carbide drawing dieis processed, the size of the template should be larger than the working area, and the standard template size should be selected. The position of the template locking screw is related to the type of mold and the size of the template.
Among them, the single engineering molds are most often used to configure the locking screws at the four corners, and the most standard form of work area can be widely used. Long-shaped molds and continuous molds are most commonly used with locking screws at the four corners and middle positions.
(2) The thickness of the template
The thickness of the template is absolutely related to the structure of the mold, the type of stamping processing, the processing force of the stamping, and the precision of the stamping processing.
It is difficult to determine the thickness of the mold based on theoretical calculations. Generally, it is obtained from experience. The thickness of the template used in the design should be as small as possible, and the mold height and clamping height should be standardized to facilitate purchase and inventory management.
Therefore, if we want to produce qualified products through drawing mold processing, we must select and design the specifications at the very beginning, so that there will be a relatively smooth production process.
More details,pls contact Toby, E-mail:sales-manager302 at wococarbide.com.
热门资讯
