What is the general maintenance and cleaning of tungsten carbide pin punch?
The tungsten steel punch we are talking about here is a metal part for processing mold parts. Generally, when we use the punch, we should strictly follow the machine requirements to avoid damage to the punch caused by illegal operations. So in daily life, how to maintain and clean the tungsten steel punch? Let's take a look at how to maintain and clean tungsten carbide pin punch with the editor today: In the daily maintenance of tungsten carbide pin punch, if the tungsten carbide pin punch wear quickly, their life will be greatly reduced.
First of all, always pay attention to waterproof and moisture-proof, check whether there is water on the surface of the tungsten steel punch, and wipe it dry in time. Even if the material of the tungsten steel punch is made of corrosion-resistant tungsten steel, it should be carefully protected to avoid unnecessary wear.
In fact, you need to check whether it is because of insufficient lubricant. If it is a punch with insufficient lubricant, the wear will become more and more serious after long-term use, which greatly reduces the service life of the punch. At this time, it needs to be supplemented appropriately. Lubricant.
Thirdly, in daily maintenance, the lubricating oil and surface dirt of the tungsten steel punch should be checked frequently, and even if it is cleaned, the service life of the tungsten steel punch can be prolonged and the role of the tungsten steel punch can be effectively played.
Punches can also be called punches, upper molds, male molds, punch pins, etc. In addition, punches can also be divided into A-type punches, T-type punches, and special-shaped punches. Tungsten steel punch forming is also a complicated process. The punch is generally used as a metal part on a stamping die and is used in direct contact with the material to deform and cut the material.
Die punches usually use high-speed steel and tungsten steel as materials, and generally include high-speed steel punches and tungsten carbide pin punch. Under normal circumstances, high-speed steel can be used as the material; processing and manufacturing industries have higher requirements for the hardness of the punch, and tungsten steel is mostly used as the parts on the punching die.
Cleaning of tungsten steel punch:
Since the punch is in contact with the material for a long time, the cleaning and maintenance of the punch are particularly important. When cleaning, you need to use a copper wire brush to brush off the dirt on the surface of the punch. Note here, because the tungsten steel punch is made of special materials, wire brushes cannot be used to avoid scratching the surface. After scrubbing, use a flannel cloth to soak the abrasive paste to polish. If the dirt on the surface is hard, direct brushing may scratch the surface. At this time, you can remove the punch and put it in hot water before removing the dirt, but make sure to wipe off the water on the surface of the punch in time to avoid rust. After the dirt on the surface of the punch is removed, it must be polished in time to ensure the service life of the punch.
热门资讯
