Bushing is a key component in equipment such as spraying, spraying, sandblasting, etc., which plays a more important role. The application in the industry is also very extensive. The bushing materials used are stainless steel, silicon carbide, and cemented carbide. The bushings made of these good materials have good performance and can be used more. Although cemented carbide bushings have good material properties, high hardness and good wear resistance, they will wear out during use.
The bushings generally used in electroplating, surface treatment, desulfurization, etc. are more likely to be worn out, because this is not like other bushings that are only used in gardens, agriculture, etc., and the structure is relatively simple. However, bushings used in industries, electronics factories, etc., are used for desulfurization because of this function. They are used many times. If they are used for a long time, the worn parts will be more serious, and the service life will not be constant. If they are used Improper, life will be shortened. If the bushing collides with other objects, both sides have a strong effect, and it may also damage the bushing accessories. There are many places where cemented carbide bushings can be applied. They are used in various industries and should be operated in accordance with the specifications.
When I first started using the bushing, the bushing itself was a new accessory, and everything performed well. As the use time increases, the bushing will also be worn out. Some just fade, if you don't pay attention to repair and maintenance. The service life will be greatly shortened, and the bushing accessories will be damaged at that time. If you update the accessories or you have to replace the bushing again. The bushings used today can be divided into two categories, one is the combustion bushing, and the other is the non-combustion bushing. Regardless of the type, it must be used, and the cemented carbide bushings may also be worn during use.
与此原文有关的更多信息要查看其他翻译信息，您必须输入相应原
热门资讯
