Inconel625 3D printing metal powder15-45um 15-53um 45-105um or customized particle size. The In625 alloy has good high temperature mechanical properties, and the maximum service temperature is 950 ℃. In the strong corrosive medium, the corrosion resistance of the alloy varies with the concentration of acid, temperature and impurity content.
Introduction of Inconel625: it is a kind of Ni Cr Mo corrosion resistant alloy with good corrosion resistance and high strength. This alloy is especially suitable for service conditions requiring high corrosion resistance and high strength.
Inconel625 Chemical composition: 20.0-23 Cr, 8-10 Mo, 5.0 Fe max, 3.15-4.15 Nb, 0.10 C max, 0.50 Mn max, 0.50 Si max, 0.40 al max, 0.40 Ti max, 1.0 co Max and residual Ni.
Inconel625 Spherical nickel powder specification: 15-45 μ m； 15-53um, 45-105um, or according to customer requirements.
Production process and product features: atomization method, spherical powder under electron microscope. It has the characteristics of high spheroidization rate, good fluidity and uniform particle size. Loose density and tap density are higher.
Inconel625 Applicable equipment: EOS, Renishaw, conceeptlaser, SLM solutions, arcam and all kinds of domestic equipment.
Inconel625 Application: manufacturing thin wall vessels and pipe fittings, corrosion-resistant pipes, reactors, distillation towers, heat exchangers and valves, etc. It is widely used in aerospace, petrochemical, marine, energy and power fields, such as aero-engine parts, aerospace structural parts, chemical equipment.
热门资讯
