Cemented carbidering roller are one of the main businesses of Chengdu Woco Carbide. Chengdu Woco Carbide is a high-quality cemented carbide enterprise and a customized service provider for production and processing. He has his own opinions on the choice of cemented carbidering roller.
The billet size of the front frame of the finish rolling fluctuates greatly, the surface is rough, and the rolling shear diameter area is large. Therefore, the roll ring is required to have high strength and impact toughness. Contrary to this, the size of the billet on the finish rolling frame is small, the surface condition is improved, and the cutting diameter area is small, so the strength requirement of the roll ring is reduced. However, because it is close to the finished product or the finished product, the roll ring is required to have higher wear resistance. To ensure that the rods and wires have good dimensional tolerances and surface finishes.
Carbide Roll
If the equipment is in good condition, the rolling process is stable, the rolling speed is slow, and the cooling effect is good, the stress and thermal shock to the roll ring are small. Therefore, under the premise of meeting the strength and toughness, high hardness and good wear resistance can be used as much as possible Grade to maximize the service life of the roll ring. On the contrary, under the premise of satisfying the hardness, the grades with high strength and good toughness should be selected as much as possible to ensure that the roller is not broken.
Chengdu Woco Carbidee has a modern factory and diversified production lines. The prepared cemented carbidering roller have good impact resistance, high hardness and good wear resistance.
热门资讯
