The disc pelletizing method is used to prepare tungsten ball. The main equipment used is the disc pelletizing machine. Maintenance and maintenance of the equipment can improve equipment operation efficiency, extend equipment life, reduce equipment loss, and increase tungsten alloy ball productivity . So how to maintain the disc pelletizing machine? Chengdu Woco Carbide here gives a few suggestions.
1. Check the lubrication of each part, and inject appropriate amount of lubricating oil in time
2. Open the raw material supply valve after the ball disc rotates smoothly.
3. Frequent tightening inspections (inspection when the equipment is running), check whether the bolt connections of the anchors and other parts are loose, and deal with the looseness in time.
4. The state of the gear meshing working surface should be checked regularly, especially in the early stage of work, when the tooth surface is scratched, if the scratched area is not more than 20% of the tooth surface working surface, a slight trimming with oil stone and scraper is allowed.
5. When the motor is running, check whether the current and voltage are within the allowable range, whether the connector is hot, and whether the grounding system is good, etc. If an abnormal situation is found, it should be dealt with in time.
The above is a small suggestion for the maintenance of the disc pelletizing machine for preparing tungsten ball. Chengdu Woco Carbide has more than ten years of experience in the production and processing of cemented carbide products. The technicians and operators are very familiar with the products and equipment. They operate the equipment in strict accordance with the production and operation specifications, and comply with the production process documents, safety and equipment operation. Regulations, implementation of product quality standard process regulations. It is a cooperative enterprise worthy of entrusting the production and processing of tungsten alloy products.
热门资讯
