Wococarbide provides High-velocity oxygen-fuel spraying powder. Supersonic flame spraying was successfully developed by browning company in the United States in the early 1980s, and was first launched with jet-kote as a commodity. After several years of application and development, the advantages of this method are gradually recognized and accepted. Therefore, developed countries in the world have invested a lot of financial resources in the research and development of HVOF. In the late 1980s and early 1990s, several HVOF spraying systems were successfully developed and put into the market. Such as diamond jet, top gun, CDs, j-gun, high velocity air fuel, etc.
Supersonic flame is a high-temperature and high-speed combustion flame generated by the combustion of hydrocarbon gas such as propane and propylene or hydrogen and high-pressure oxygen in the combustion chamber or in a special nozzle. The combustion flame velocity can reach more than Mach 5 (1500m / s). It is usually called HVOF (high velocity oxygen fuel). When the powder is fed axially into the flame, the sprayed particles can be heated to a molten or semi molten state and accelerated to a speed of 300-500m / s or even higher, so as to obtain a high-quality coating with high bonding strength and compactness. The supersonic flame speed is very high, but the temperature is relatively low. For WC Co cemented carbide, it can effectively inhibit the decomposition of WC in the spraying process. The coating has not only high bonding strength, compactness and excellent wear resistance. Its wear resistance is much higher than that of plasma spraying layer, which is equivalent to that of explosive spraying layer, but also exceeds that of electroplated hard chromium layer and spray melting layer.
If you want to know more about spraying coat powder or spray welding powder, you can search online wococarbide. Wococarbide Provide various products and technical questions and answers.
热门资讯
