温馨提示

给对应标签加id="c_alert"调用该弹窗!

确定

       


    The customer hits the
coating with a hammer, and then the coating will dent. The customer said:
"Is it because the hardness of your coating is not good. I can't use
hardened steel to deform. The coating is knocked into the groove, which means
it is not hard enough.

    An important feature of
thermal spraying is that they are very brittle. When we communicate with
customers, we will remind them that "the coating is not impact
resistant". The coating is more suitable for resistance to friction and
abrasion, but when friction and abrasion are accompanied by impact and
corrosion, we need to carefully consider whether to use the spraying process.
Because the impact will damage the coating, but the corrosion will erode the
entire coating and the substrate of the product from the damaged location.

    Using a hammer to strike
and deform the coating cannot prove any problems.

Here I give a very simple example: we
can break one chopstick by hand, but due to the different strength, we cannot
break 10 chopsticks at the same time. Most of the paint we spray is only about
0.2mm, what if the spray thickness is 10mm? The author once sprayed the
thickest paint to 32mm, which is very hard, but even with such a thick paint,
its brittleness has not changed, and it will still break when subjected to a
strong impact.

Second, the coating is not
wear-resistant

    A customer used an angle
grinder to grind our thermal spray coating, and then told me: "The coating
you made is not wear-resistant, I can use an angle grinder to grind it away.

Later, I gave this client an
"example of water droplets on a stone". I believe everyone can
understand this simple fact. In this world, nothing will not wear out because
it is not enough to get the job done. There is another problem. The oxide layer
on the surface of the coating is polished off, revealing the metallic color,
which does not mean that the coating is gone. The tungsten carbide coating will
become brighter after polishing. When many customers use it, the coating is
smooth and it is said that the coating has disappeared. This analysis is very
arbitrary. The main method is to use a spectrometer to analyze whether the
coating still exists.

    Remember that we must use
scientific methods to judge the hardness, wear resistance and corrosion
resistance of the coating to make it reasonable and well-founded. It is not a
method that violates regulations.



For more information about the 3D printing
powder, spraying coat powder, or WC based powder,



 you
may search online wococarbide. Wococarbide.com provides various products and
technical questions and answers.

Wococarbide

Member login

shuriyouwu
Forgot password?

Join free

Reset Your Password

Email:

SMS code:

Send Code

New Password:

Submit