What are the welding defects?

       

What are the welding defects?

What are the welding defects?

What are the welding defects?

Welding defects What?

Welding defects What?

无法加载全部结果

重试

正在重试…

正在重试…

What is a welding defect? Defects that do not meet the requirements of the standard during the welding process.

What is a welding defect? Defects that do not meet the requirements of the standard during the welding process.

What is a welding defect? Defects that do not meet the requirements of the standard during the welding process.

What welding defect defect does not meet the standard requirements of the welding process produced.

What welding defect defect does not meet the standard requirements of the welding process produced.

无法加载全部结果

重试

正在重试…

正在重试…

What is a stomata?

What is a stomata?

...

What pores?

...

无法加载全部结果

重试

正在重试…

正在重试…

During the welding process, the gas in the molten pool metal cannot escape before the metal cools, and the holes formed in the weld metal (inside or on the surface).

During the welding process, the gas in the molten pool metal cannot escape before the metal cools, and the holes formed in the weld metal (inside or on the surface).

During the welding process, the gas in the molten pool metal cannot escape before the metal cools, and the holes formed in the weld metal (inside or on the surface).

During the welding process, the gas in the metal bath could not have time to escape before the metal is cooled, the cavities in the weld metal (or inner surface) is formed.

During the welding process, the gas in the metal bath could not have time to escape before the metal is cooled, the cavities in the weld metal (or inner surface) is formed.

无法加载全部结果

重试

正在重试…

正在重试…

无法加载全部结果

重试

正在重试…

正在重试…

What is welding defect

What is welding defect

...

What welding defect

...

无法加载全部结果

重试

正在重试…

正在重试…

无法加载全部结果

重试

正在重试…

正在重试…

Defects produced during the welding process that do not meet the requirements of the standard.

Defects produced during the welding process that do not meet the requirements of the standard.

...

Does not meet the standard requirements of the defects generated during the welding.

...

无法加载全部结果

重试

正在重试…

正在重试…

无法加载全部结果

重试

正在重试…

正在重试…

What is a stomata?

What is a stomata?

...

What pores?

...

无法加载全部结果

重试

正在重试…

正在重试…

无法加载全部结果

重试

正在重试…

正在重试…

During the welding process, the gas in the molten pool metal cannot escape before the metal cools, and the holes formed in the weld metal (inside or on the surface).

During the welding process, the gas in the molten pool metal cannot escape before the metal cools, and the holes formed in the weld metal (inside or on the surface).

During the welding process, the gas in the molten pool metal cannot escape before the metal cools, and the holes formed in the weld metal (inside or on the surface).

During the welding process, the gas in the metal bath could not have time to escape before the metal is cooled, the cavities in the weld metal (or inner surface) is formed.

During the welding process, the gas in the metal bath could not have time to escape before the metal is cooled, the cavities in the weld metal (or inner surface) is formed.

无法加载全部结果

重试

正在重试…

正在重试…

无法加载全部结果

重试

正在重试…

正在重试…

What is crack?

What is crack?

...

无法加载全部结果

重试

正在重试…

正在重试…

无法加载全部结果

重试

正在重试…

正在重试…

Under the combined action of welding stress and other brittle factors, the gaps formed in the weld metal and heat-affected zone (internal or surface) are called cracks.

Under the combined action of welding stress and other brittle factors, the gaps formed in the weld metal and heat-affected zone (internal or surface) are called cracks.

Under the combined action of welding stress and other brittle factors, the gaps formed in the weld metal and heat-affected zone (internal or surface) are called cracks.

In the welding stress-induced embrittlement and other factors together, it referred to as a crack is generated in the gap and the heat affected zone of the weld metal (or inner surface) is formed.

In the welding stress-induced embrittlement and other factors together, it referred to as a crack is generated in the gap and the heat affected zone of the weld metal (or inner surface) is formed.

无法加载全部结果

重试

正在重试…

正在重试…

无法加载全部结果

重试

正在重试…

正在重试…

1. Thermal cracks—cracks that occur immediately after welding at high temperatures.

1. Thermal cracks—cracks that occur immediately after welding at high temperatures.

1. Thermal cracks—cracks that occur immediately after welding at high temperatures.

1. Thermal cracks - cracks generated at the time immediately after welding temperature.

1. Thermal cracks - cracks generated at the time immediately after welding temperature.

无法加载全部结果

重试

正在重试…

正在重试…

无法加载全部结果

重试

正在重试…

正在重试…

2. Cold cracks-cracks that occur when the metal is cooled to room temperature after welding; or cracks that occur several hours or days after welding are called delayed cracks.

2. Cold cracks-cracks that occur when the metal is cooled to room temperature after welding; or cracks that occur several hours or days after welding are called delayed cracks.

2. Cold cracks-cracks that occur when the metal is cooled to room temperature after welding; or cracks that occur several hours or days after welding are called delayed cracks.

2. Cold Crack - cooling after welding cracks in the metal to room temperature; after welding or hours, a few days after the crack is generated is referred to as delayed cracking.

2. Cold Crack - cooling after welding cracks in the metal to room temperature; after welding or hours, a few days after the crack is generated is referred to as delayed cracking.

无法加载全部结果

重试

正在重试…

正在重试…

What is undercut? Due to incorrect selection of welding parameters or incorrect operation methods, grooves or depressions produced along the base metal part of the weld toe (fusion line)-called undercuts, will cause local stress concentration. What is incomplete penetration? The phenomenon that the root of the joint is not completely penetrated during welding. What is unfused? During fusion welding, between the weld bead and the base metal or between the weld bead and the weld bead, the part that has not been completely melted. What is welding spatter? During the welding process, the molten metal particles and slag are scattered around. What is a solder bump? During the welding process, the molten metal flows to the metal nodules formed on the unmelted base metal outside the weld. What is slag inclusion? The phenomenon of welding slag remaining in the weld. What is a crater? How to prevent it? When the arc is received during welding, a depression crater that is lower than the height of the weld is formed at the end of the weld bead-called arc crater. Generally, there are defects such as low-melting eutectic, inclusions, and crater cracks in the arc crater. Use the arc closing current (less than 60% of the welding current) to stay in the arc crater for a certain period of time, and fill the arc crater with metal powder to prevent arc crater defects. What is non-destructive testing? What does it have? A method of detecting defects without damaging the performance and integrity of the inspected material or finished product. There are: X-ray flaw detection (RT) Ultrasonic flaw detection (UT) Magnetic particle inspection (MT) Penetration testing (PT), etc.

无法加载全部结果

重试

正在重试…

正在重试…