Monel400

       

Wolocarbide provides Monel400(NiCuFeMnC). Production method: atomization method. Shape: spherical. Particle size: 180 μ M
(- 80 mesh), 150 μ M (- 100 mesh), 38 μ M (400 mesh). Monel 400 alloy (UNS N04400 or MCu-28-1.5-1.8 or Ni68Cu28Fe) is a kind of nickel based alloy material with good corrosion
resistance in seawater, chemical solvents, ammonia, sulfur, chlorine, hydrogen
chloride, various acidic media such as sulfuric acid, hydrofluoric acid,
hydrochloric acid, phosphoric acid, organic acid, alkaline media, salt and
molten salt.

 

Melting point: 1300-1350 Monel 400 alloy is
a single phase solid solution with high strength. It is a corrosion resistant
alloy with large amount, wide application and good comprehensive properties.
The alloy has good properties in hydrofluoric acid and fluorine gas

 

It also has excellent corrosion resistance
to hot concentrated alkali solution. It is also resistant to neutral solution,
water and sea water

 

Corrosion of water, atmosphere, organic
compounds, etc. An important feature of the alloy is that it does not produce
stress corrosion. The cutting performance is good.

 

Application

 

Monel 400 is mainly used in the fields of
chemistry, petrochemical industry and marine development. It can be used to
manufacture all kinds of heat exchange equipment, boiler feed water heater,
petroleum and chemical pipeline, vessel, tower, tank, valve, pump, reactor,
shaft, etc. Widely used in thermal spraying and metal filter material
manufacturing.