Gray Inconel625 3D Printing Metal Powder 15-45um 15-53um 45-105um Customized Particle Size Nickel Powder

       

Inconel625 3D printing metal powder15-45um
15-53um 45-105um or customized particle size. The In625 alloy has good high
temperature mechanical properties, and the maximum service temperature is 950
℃. In the strong corrosive medium, the corrosion resistance of the alloy varies
with the concentration of acid, temperature and impurity content.

Introduction
of Inconel625: it is a kind of Ni Cr Mo corrosion resistant alloy with good
corrosion resistance and high strength. This alloy is especially suitable for
service conditions requiring high corrosion resistance and high strength.

Inconel625
Chemical composition: 20.0-23 Cr, 8-10 Mo, 5.0 Fe max, 3.15-4.15 Nb, 0.10 C
max, 0.50 Mn max, 0.50 Si max, 0.40 al max, 0.40 Ti max, 1.0 co Max and
residual Ni.

Inconel625
Spherical nickel powder specification: 15-45 μ m； 15-53um,
45-105um, or according to customer requirements.

Production
process and product features: atomization method, spherical powder under
electron microscope. It has the characteristics of high spheroidization rate,
good fluidity and uniform particle size. Loose density and tap density are
higher.

Inconel625
Applicable equipment: EOS, Renishaw, conceeptlaser, SLM solutions, arcam and
all kinds of domestic equipment.

Inconel625
Application: manufacturing thin wall vessels and pipe fittings,
corrosion-resistant pipes, reactors, distillation towers, heat exchangers and
valves, etc. It is widely used in aerospace, petrochemical, marine, energy and
power fields, such as aero-engine parts, aerospace structural parts, chemical
equipment.