Teflon spraying performance

       

Teflon spray has outstanding excellent comprehensive properties, high temperature resistance, corrosion resistance, non-stick, self-lubricating, excellent dielectric properties, and a very low coefficient of friction. Used as engineering plastics, it can be made into Teflon tubes, rods, belts, plates, films, etc. Generally used in corrosion-resistant pipelines, containers, pumps, valves, radar, high-frequency communication equipment, and radio equipment with high performance requirements. Add any filler that can withstand the sintering temperature of Teflon, and its mechanical properties can be greatly improved. At the same time, other excellent properties of Teflon are maintained. Filled varieties include glass fiber, metal, metal oxide, graphite, molybdenum disulfide, carbon fiber, polyimide, EKONOL, etc. The wear resistance and limit PV value can be increased by 1000 times. Coating on the surface of the bullet head can increase the penetration of the bullet, so that the bullet can shoot through the body armor. The following is a brief introduction to the application scope of Teflon spraying:

 

Non-sticky: Almost all substances do not adhere to the Teflon coating. Very thin coatings can also show good non-stick properties.

 

food industry--

 

Baking utensils, baking pans, scones pans, various pastry molds, processing kneading machines, household appliances, food conveyor belts, bread cutters

 

Plastic Industry--

 

Mould, laminating roller, embossing roller, EVA template

 

Rubber Industry--

 

Shoe making mold, ball making mold, other rubber product molds

 

Air transport industry--

 

Flush toilet on the plane

 

Textile machinery industry--

 

Drying cylinder, roller (good anti-sticking effect on pigments and sizing materials, easy to clean dyes without cross contamination)

 

High and low temperature resistance: Teflon coating can withstand 320 degrees in a short time, and generally can be used continuously between -200 degrees and 260 degrees. It has significant thermal stability, and it can work at freezing temperatures without being brittle It will not melt under high temperature.

 

electronics industry--

 

Exhaust duct, perforated plate

 

Home appliance industry--

 

Rice cooker, gas stove, iron, microwave oven, oven

 

chemical industry--

 

Pipe fittings, mixing rods, filtering equipment, chemical industry machinery containers

 

Corrosion resistance: Due to the strong inertness of Teflon spraying, except for individual media, it can withstand various acids, alkalis, salts and organic matter (solvents). Teflon is hardly corroded by any chemicals and can protect parts from Suffer any kind of chemical corrosion.

 

chemical industry--

 

Reaction tanks, reaction tanks, storage tanks, heat exchangers, stirring rods, environmental engineering wastewater and waste gas treatment equipment, pipe fittings, pipes, valves, pumps

 

electronics industry--

 

Acid-resistant and fire-resistant exhaust ducts, printed circuit boards, electroplating racks for semiconductor factories

 

Electroplating industry--

 

Electroplating hanger, electroplating tank

 

Paper Industry--

 

Transfer roller

 

Low friction and wear resistance: Teflon spray coating has a low friction coefficient. The friction coefficient changes when the load is sliding, but the value is only between 0.05 and 0.15.

 

Machinery Industry--

 

Bearing inner wall, gear machinery, automotive machinery rocker arm, mechanical small parts, mechanical bearing

 

Garden Appliance Industry--

 

Knives, scissors, screws

 

Textile printing and dyeing industry--

 

Dyeing and sizing roller, non-woven roller

 

auto industry--

 

Self-lubricating parts, brackets, air-conditioning compressor pistons

 

General industry--

 

Molding metal molds for rubber and plastic products, EVA molds, glove molds, and electric escalators to reduce noise and friction

 

Electrical properties: excellent insulation resistance

 

electronics industry--

 

Small circuit board parts, sliding contacts of electrical switches

 

General industry--

 

Insulating tube

 

Food safety: Because the solid component of the Teflon spray coating is non-toxic, it conforms to the 177.1550, 177.300 regulations of the US FDA Title 21. Can be in contact with food

 

Food processing industry--

 

Baking utensils, biscuit molds, cheese molds, hamburger pans, rollers, cutters, pans

 

Non-wetting: The surface of the Teflon coating does not stick to water and oil, and it is not easy to stick to the solution during production operations. If there is a small amount of dirt, simply wipe or rinse with water to remove

 

Household appliances--

 

Heater, inside of microwave oven, coffee pot, hamburger steak pan, scones pan, ice maker, range hood