Thermal Spray Material 86%WC10%Co4%Cr

       

Tungsten carbide cobalt chromium powder, which is composed of WC10Co4Cr, is another important wear-resistant spraying material after WC12Co. Compared with WC12Co powder, WC10Co4Cr coating not only has wear resistance, but also has certain corrosion resistance. When there is not only wear but also corrosion under working conditions, WC10Co4Cr should be the best choice.

For more information about the 3D printing powder, spraying coat powder, or WC based powder, you may search online wococarbide. Wococarbide Provide various products and technical questions and answers.

WC10Co4Cr is a medium granular tungsten carbide with carbon content of 5 ~ 6%; The maximum working temperature is 500 ℃, and the cobalt chromium bonded phase shows better corrosion and wear resistance than the cobalt bonded phase; Suitable for aqueous solution and humid corrosive environment; Hard chromium plating substitute; Used in roll, ball valve and oilfield equipment.

The inherent characteristics of WC Co coating are wear-resistant particle wear, erosion wear and micro vibration wear. After the introduction of Cr element, it provides corrosion resistance. This kind of material is the best substitute to replace hard chromium plating. When human beings have higher and higher requirements for the environment, hard chromium plating is declining, which sets up a platform for the wide application of WC10Co4Cr.