Common Repair Types for Thermal Spray

       Flame spraying, oxy-B flame powder spraying, oxy-B flame wire spraying, oxy-B flame spray welding, high speed flame spraying (HOVF), arc spraying, plasma spraying, atmospheric plasma spraying, low pressure plasma spraying



1. All kinds of cement machinery shafts, holes, planes, and special-shaped surfaces can be mechanically repaired, or repaired on site.



For example: all kinds of crusher main shaft bearing position; movable jaw bearing hole; all kinds of conveying fan main shaft (such as Roots fan); all kinds of motor rotor bearing position; grinding machine, reducer gear shaft bearing position; Surface treatment and repair of spiral surface, tower base, bulkhead plate, lining plate scouring surface, etc., and many wear and tear can be repaired on site.



2. All kinds of mold damage, strain, collapse angle, bump, pit, etc. lead to mold failure can be repaired and repaired on site.



After the repair, the mold is not annealed, undercut, or deformed. The bonding strength is metallurgical bonding except that the brush plating is ionic bonding. The bonding strength is comparable to that of the substrate. After repair, the material and hardness can be selected according to the mold substrate!



Plastic injection molds, zinc-based alloy plastic molds, TV case molds, tire molds, various injection mold cavities, telephone mold bases, table tennis molds, telescope molds, water meter molds, plastic buckets, plastic cups and other plastic supplies molds , glass molds, cold stamping dies