current position:Information and data>The performance of Teflon spray
Teflon spraying has excellent comprehensive performance, high temperature resistance, corrosion resistance, non-stick, self-lubricating, excellent dielectric properties, and low friction coefficient. Used as engineering plastics, it can be made into Teflon tubes, rods, belts, plates, films, etc. It is generally used in corrosion-resistant pipelines, containers, pumps, valves, and radar, high-frequency communication equipment, and radio equipment with high performance requirements. Adding any filler that can withstand the sintering temperature of Teflon can greatly improve its mechanical properties. At the same time, other excellent properties of Teflon are maintained. Filled varieties include glass fiber, metal, metallized oxide, graphite, molybdenum disulfide, carbon fiber, polyimide, EKONOL, etc. The wear resistance and limit PV value can be increased by 1000 times. Coating on the surface of the bullet warhead can increase the penetration of the bullet, so that the bullet can shoot through the body armor. The following is a brief introduction to the application range of Teflon spraying:
Non-stick: Almost all substances do not adhere to the Teflon coating. Very thin coatings can also show good non-stick properties.
food industry--
Baking utensils, baking pans, scones pans, moulds for various pastries, kneaders for processing, household appliances, food conveyors, bread cutters
Plastic Industry--
Mould, Laminating Roller, Embossing Roller, EVA Template
Rubber Industry--
Shoe making mold, ball making mold, other rubber product mold
Air transport industry --
toilet on airplane
Textile machinery industry--
Drying cylinder, roller (good anti-stick effect on pigments and sizing materials, easy to clean and no cross-contamination of dyes)
High and low temperature resistance: Teflon coating can withstand 320 degrees in a short time, generally can be used continuously between -200 degrees and 260 degrees, and has significant thermal stability, it can work at freezing temperatures without being brittle It does not melt at high temperature.
electronics industry--
flue, perforated plate
Home appliance industry--
Rice cooker, gas stove, iron, microwave, oven
chemical industry--
Pipe fittings, mixing rods, filter equipment, chemical industry machinery containers
Corrosion resistance: Due to the strong inertness of Teflon spraying, in addition to individual media, it is resistant to various acids, alkalis, salts and organic substances (solvents). Teflon is almost not corroded by any chemicals and can protect parts from Subject to any kind of chemical attack.
chemical industry--
Reaction tanks, reaction tanks, storage tanks, heat exchangers, stirring rods, environmental engineering wastewater and waste gas treatment equipment, pipe fittings, pipes, valves, pumps
electronics industry--
Acid-resistant fire ducts for semiconductor factories, printed circuit boards, electroplating racks
Electroplating industry--
Electroplating hanger, electroplating tank
Paper industry--
transfer roller
Low friction and wear resistance: Teflon coating has a low coefficient of friction. The coefficient of friction changes when the load slides, but only between 0.05 and 0.15.
Machinery Industry--
Bearing inner wall, gear machinery, auto mechanical rocker arm, small mechanical parts, mechanical bearing
Garden appliance industry--
Knives, scissors, screws
Textile printing and dyeing industry--
Dyeing and finishing sizing roller, non-woven roller
auto industry--
Self-lubricating parts, brackets, air conditioner compressor pistons
General Industry--
Rubber, plastic products and other forming metal molds, EVA molds, glove molds, electric escalators to reduce noise and reduce friction
Electrical properties: has excellent insulation resistance
electronics industry--
Small parts of circuit boards, sliding contacts of electrical switches
General Industry--
insulating pipe, insulating sleeve
Food safety: Since the solid component of Teflon spray coating is non-toxic, it complies with the regulations of 177.1550 and 177.300 of US FDA Title 21. Can come into contact with food
Food processing industry--
Baking utensils, cookie tins, cheese tins, hamburger pans, rollers, cutters, pans
Non-wetting: The surface of Teflon coating is free from water and oil, and it is not easy to be stained with solution during production operation. If there is a small amount of dirt, it can be removed by simply wiping or rinsing with water.
Household utensils--
Heater, Microwave Inner, Coffee Pot, Hamburger Steak Pan, Scones Pan, Ice Maker, Range Hood
Hot information