What specific details should be paid attention to when using an electric hammer?

       When using a hammer, pay attention to specific details:



The electric hammer is a tool for drilling holes on hard materials such as concrete and brick walls. As long as the drill bit is properly adjusted, it can also be used as an ordinary electric drill. So what details should you pay attention to when using an electric hammer?



1. Personal protection



The electric hammer is a small working tool, and the users are all directly holding the electric hammer to work. So pay attention to a few things:



1. When operating, be sure to wear protective goggles, and when drilling into the high surface layer, a protective mask is required for effective protection.



When the electric hammer is working, because it is a close-range operation and the hammer is a relatively hard material, earplugs should be worn to reduce noise stimulation.



2. When the drill bit of the electric hammer is replaced and disassembled after the work, care should be taken to prevent scalding.



3. When the operator is operating, because of the operation with both hands, avoid spraining the arm.



2. Preparation before work



1. It is best to use a power supply that matches the nameplate. If there is no same, you should also use a power supply with the same voltage and connect a leakage protector.



2. The drill bit and holder of the electric hammer must be adapted and installed accurately.



3. When drilling, it is necessary to confirm whether there are cables, wires or pipes buried at the drilling site.