What are the types of repairs commonly used in thermal spraying?

       Flame spraying, oxy-2 flame powder spraying, oxy-2 flame wire spraying, oxy-2 flame spray welding, high speed flame spraying (HOVF), arc spraying, plasma spraying, atmospheric plasma spraying, low pressure plasma spraying

1. All kinds of cement machinery shafts, holes, planes, special-shaped surfaces are worn, fit position failure, bearing position, sealing position, bearing seat wear, etc. can be mechanically repaired or repaired on site!

For example: various types of crusher main shaft bearing positions; movable jaw bearing holes; various conveying fan main shafts (such as Roots fans); various motor rotor bearing positions; mill and reducer gear shaft bearing positions;

The surface treatment and repair of the spiral surface of the spiral reamer, the strengthening of the scouring surface of the tower base, the partition plate, and the lining plate, etc., and many wear and tear can be repaired on site!

All kinds of cement machinery shafts, holes, planes, special-shaped surfaces are worn, fit position failure, bearing position, sealing position, bearing seat wear, etc. can be mechanically repaired or repaired on site!

2. All kinds of mold damage, strain, slump, bumps, pits, etc. lead to mold failure can be repaired and repaired on site!

After the repair, the mold will not be annealed, undercut, or deformed. The bonding strength is metallurgical bonding except that the brush plating is ionic bonding. The bonding strength is comparable to that of the substrate. The material and hardness after repair can be selected according to the mold substrate!

Plastic injection molds, zinc-based alloy plastic molds, TV case molds, tire molds, various injection mold cavities, telephone mold bases, table tennis molds, telescope molds, water meter molds, plastic buckets, plastic cups and other plastic supplies molds , glass molds, cold stamping dies