How to use RT series rust remover

       1) Product performance



   (1) The rust removal of this product is thorough, which can ensure the rust removal of subtle and inconvenient parts, and ensure the quality of rust removal.

   (2) While removing oxide scale and rust, a dense passivation film can be formed on the surface of the treated part, thus playing the function of rust prevention. The film has good corrosion resistance and film adhesion, and is most suitable for surface treatment before spraying

   (3) This product uses special inorganic substances and corrosion inhibitors. The treatment process is an anti-corrosion reaction. The treated steel will not produce hydrogen embrittlement and over-corrosion, so it will not affect the strength of the steel itself and the ductility of the metal. make an impact.

   (4) Use at room temperature without heating, saving energy.

   (5) This product is non-toxic, non-flammable, easy to operate and control, does not hurt the skin in a short time contact, and ensures the safety of operation.

    2) How to use

   (1) Use at room temperature

   (2) The workpiece can be treated by soaking, brushing and spraying. For workpieces with a rust grade of A and B (that is, there is rust but no pitting) according to the national standard GB8923-88, the workpiece to be treated should be completely immersed in the rust remover. When the temperature is 25°C, the treatment time is about 30min; when the temperature is 10°C, the treatment time is about 90min.

   (3) Do not rinse with clean water after the treated workpiece is taken out, and other processes can be carried out after natural drying.

   (4) Dosage of this rust remover: 1kg strong rust remover can treat a surface area of 30m2~40m2