What are the precautions in the use of reducing machine molds

       Precautions in the use of reducing machine molds:



Condensation of the contactor is caused by humidity changes, take measures to prevent the contactor from short-circuiting between phases, and pay attention to cleaning the dirt on the polar surface of the iron core.



Clean the dirt on the fuselage, especially the dirt between the incoming and outgoing wires, to prevent short circuit between phases. At the same time, pay attention to cleaning the dirt on the polar surface of the iron core.



When it is found that the contacts are severely worn and can no longer be used, new contacts or contacts of the same type should be replaced in time.



It has the advantages of high production efficiency, simple process, convenient operation, saving raw materials, and stable quality. It uses hydraulic technology to process round steel, steel bars and other parts into special abrasive tools. After cold pressing, the density of the steel can be greatly increased, thereby improving the compressive strength of the material. However, the plasticity and impact toughness are not reduced, so that the strength of the threaded part is consistent with the strength of the rod, which solves the shortcomings of reduced pressure resistance and impact toughness due to lathe spalling. It can be used as an ideal equipment for the production of large-diameter round steel, bolts, double-ended construction screws, high-speed bridge screws, mine bolts, bolts, and long-rod screws.



How to make the reducing machine mold reach the appropriate service life:



In fact, for the mold of the reducing machine mold, it is necessary not only to reflect its performance requirements, but also to achieve a sufficient service life during use. How to make the reducer mold reach a long service life in use. The first thing to pay attention to when purchasing is that there are many mold companies that produce this kind of mold, and different production companies will naturally have different performances in terms of service life.



If a reducing machine mold enterprise chooses different materials in production, it will show different service life in use, as well as many conditions such as different production processes of manufacturers. It will also make a reducer die in use, and it will achieve different performances in its service life, because this die is hit with metal when it is working, so it must achieve and good wear resistance.



Only by using the reducer die, can better wear resistance be achieved, thereby achieving a good service life. Of course, if you want the mold to achieve better wear resistance, that is, it can use better production materials in production. Therefore, the factor that determines the service life of the mold is its production material. Only when the production material meets the production requirements, the reducer mold can achieve a long service life.



Reducer mold maintenance method:



1. After long-term use, polish the edge of the reducer. After grinding, the edge surface should be demagnetized and must not be magnetic, otherwise it will easily cause material blocking.



2. Elastic parts such as springs are easily damaged during use, and usually break and deform. The way is to replace. During the replacement process, pay attention to the specification and model of the spring. The size and type of spring is determined by color, outer diameter and length. Only when these three items are the same, we can replace it.



3. In the process of using the reducing machine die, the punch is easy to break and bend. Damaged punches and punch sleeves are usually replaced with parts of the same specification. The parameters of the punch mainly include the size of the workpiece, the size of the mounting piece, and the length size.



4. Fasten the parts, check whether the fastening parts are loose or damaged, and replace the parts of the same specification.



5. Pressing plate, uniglue and other stamping parts, unloader, pneumatic ejector and other unloading parts, check the relationship between the parts and whether there is damage during maintenance, repair the damaged parts, and check whether the pneumatic ejector is leaking, and take action according to the specific situation. If the air tube is damaged, replace it.