current position：Information and data>metal powder
grade name chemical composition manufacturing method particle size range
WOCO101 Aluminum powder CP Al99 Atomization 90/45μm Repair aluminum and magnesium based workpieces, electromagnetic shielding, electrical conductivity, anti-atmospheric corrosion, seawater corrosion resistance, marine environment corrosion resistance, working temperature <60℃, coating melting point 650℃ --
WOCO131 Copper powder CP Cu99 Atomization 90/45μm Repair copper base workpiece, ink corrosion resistance, non-magnetic, soft coating, electromagnetic shielding, conductive, working temperature <150℃, coating melting point 1080℃ --
WOCO145 Molybdenum Powder AP Mo99.5 Atomized 90/38μm The coating is hard and wear-resistant, resistant to sliding wear, friction wear, fretting wear, groove caused by wear, anti-electric corrosion, dense coating, can be used for piston Rings, synchronizer rings, pump parts, diesel fuel injectors, press fit parts, valve parts, gears, cam follower bearings, bonding layers with iron substrates, friction materials, self-lubricating materials, target materials, working temperature <350℃ --
WOCO152 Chromium powder AP Cr99.5 Electrolysis 180/75μm target, anti-corrosion coating, working temperature <600℃ --
WOCO200 pure nickel powder CP AP Ni99.3 Atomization 45-75um Repairs nickel-based workpieces, restores size, dense coating, easy to process, can be used for corrosion resistance, ceramic coating layering. Working temperature≤500℃ --
WOCO200-1 Nickel powder AP CP Ni99.5 Atomization 45/11μm Repair nickel-based workpiece, restore size, dense coating, easy to process, can be used for corrosion resistance, ceramic coating layer. It can also be used for electromagnetic shielding, targets and other products, working temperature ≤ 500 ℃ --
WOCO233 Titanium Powder VP Ti99.5 Gas Atomization 180/53μm The primer material for spraying hydroxyapatite, used for artificial implantation, the coating has high porosity, and it is recommended to spray in a vacuum state. Operating temperature < 400 °C --
WOCO239 Silicon Powder VP Si99.9 Melting and crushing 45/15μm high-purity fine-grained silicon powder, used for EBC coating layering, semiconductor parts, targets, etc., working temperature <1000 °C --
WOCO341 Tungsten powder AP W99 reduction method 75/45μm rocket engine nozzle, tail cone, refractory crucible, anti-metal melt erosion coating. Can be used for targets. Working temperature<300℃
volume_up
content_copy
share
Hot information
Copyright © 2016-2018 Chengdu WOCO Carbide Industry Co., Ltd. All Rights Reserved.
