Talking about the types of repairs commonly used in thermal spraying

       What are the types of repairs commonly used by thermal spray:



Flame spraying, oxyethyl flame powder spraying, oxyethyl flame wire spraying, oxyethyl flame spray welding, high speed flame spraying (HOVF), arc spraying, plasma spraying, atmospheric pressure plasma spraying, low pressure plasma spraying



1. All kinds of cement machinery shafts, holes, planes, special-shaped surfaces are worn, with faults, bearings, seals, bearing wear can be mechanically repaired, or repaired on site!



For example: various crusher main shaft bearing positions; movable jaw bearing holes; various conveying fan main shafts (such as Roots fans); various motor rotor bearing positions; rolling mill, reducer gear shaft bearing positions;



Surface treatment and repair of the rotary surface of the rotary reamer, the base, the silo plate, and the scouring surface of the lining plate, etc., and many wear and tear can be repaired on site!



All kinds of cement machinery shafts, holes, planes, special-shaped surfaces are worn, with faults, bearings, seals, bearing wear can be mechanically repaired, or repaired on site!



2. Mold failures caused by various mold damages, strains, chipping angles, collisions, pits, etc. can be repaired and repaired on site!

The repaired mold is not annealed, undercut, or deformed. In addition to brush plating ion bonding, the bonding strength is metallurgical bonding. The bonding strength can be compared with the matrix, and the matrix mold can be selected according to the material and hardness!

Plastic injection molds, zinc-based alloy plastic molds, TV casing molds, tire molds, various injection mold cavities, telephone mold bases, table tennis molds, telescope molds, water meter molds, plastic buckets, plastic cups and other plastic product molds, glass Dies, cold stamping dies.