What are the characteristics of supersonic spraying in three minutes?

       

Supersonic spraying mainly studies the powder feeding speed and powder feeding ability. For the processing ability of complex workpieces, this indicator is difficult to understand for friends who have not contacted. It must be carefully understood and carefully compared, the built-in high-voltage electrostatic sprayer (which is a type of static electricity) is much more powdery than the high-voltage external product. In addition, the performance of similar products of different supersonic spraying manufacturers often varies greatly. The special working surface formed by supersonic spraying can achieve a series of functions such as corrosion resistance, wear resistance, friction reduction, high temperature resistance, oxidation resistance, heat insulation, insulation, electrical conductivity, and microwave radiation resistance. Let's take a look!

1. The supersonic spraying efficiency is high, and the airless spraying is mechanized. The supersonic spraying efficiency is about 10 times that of the traditional manual roller brush.



2. The wall paint is uniform and smooth, and the paint with good texture is atomized into fine particles under high pressure. The content of atoms, molecules and ions is evenly distributed on the wall, forming a smooth, smooth and dense coating on the wall. Brushing is not of high quality compared to other traditional methods. Since the high-temperature gas generated by the combustion passes through the expansion tube at a high speed to obtain supersonic spray, the aviation kerosene with supersonic spray and combustion accelerant is introduced into the combustion chamber in a certain proportion for mixing and explosive combustion.



3. The coating has strong adhesion and improves the service life of the coating - the content of coating particles: atoms, molecules and ions penetrate into the wall under high pressure, which enhances the mechanical bite force between the coating particles and the wall, and makes the coating more dense. The coating has a longer lifespan.



4. The coating utilization rate is high. Compared with brush coating and roller coating, airless spraying does not require dip coating during on-site construction, and does not leak coating before discharge, avoiding the waste of paint. Compared with traditional air spraying, airless spraying replaces atomized air with atomized paint, which will not cause paint to scatter around, pollute the environment and cause waste.