Talking about the appropriate thickness of supersonic tungsten carbide spray coating?

       

Any type of supersonic spraying must have a certain range, and the processing methods must be different. We must consider why spraying is carried out, what processing requirements are there, and so on. Generally, for tungsten carbide spraying, we need to find a professional company to complete the processing and production. The other party provides equipment and materials, and can also ensure the technical level. We do not need to worry about the processing effect. However, many people may not know the thickness of the tungsten carbide spray coating, and do not know how to set the thickness, so how much thickness can ensure the spraying effect? The following tungsten carbide spraying manufacturers will introduce to you!

The thickness of carbide spraying has a certain relationship with the processing technology. Generally speaking, if it is vacuum evaporation, the thickness will definitely be thinner, but if special equipment is used for spraying, the thickness can be basically reached. 1 mm. In the conventional processing mode, the thickness is basically controlled at about 0.3-0.5 mm, depending on our actual requirements. If only general spraying treatment is carried out, because the hardness of carbonization itself is already very high, basically 0.1 mm can also ensure very good wear resistance.



The specific thickness of the tungsten carbide spray coating is more appropriate, and you still have to consider your own processing requirements, as well as specific wear resistance requirements and so on. There are many manufacturers that can provide us with this type of processing, but what kind of processing methods the manufacturers can provide us with, and the specific cost, etc., we also need to make an overall confirmation. The higher the thickness, the higher the natural processing cost, and the choice of processing technology will also affect the cost, so it is indispensable to make an overall comparison.