Introduction to the machining process of ceramic inserts

       Ceramic blades are a great type of blades. They are not only resistant to high temperature, but also corrosion-resistant. At the same time, they also look gorgeous. Many people have never used ceramic blades and don’t know much about ceramic blades, so I will introduce them to you next. Let's take a look at the processing process of ceramic blades.



Process of ceramic inserts



1. Precision machining method of ceramic inserts - turning



Turning is mainly to cut industrial ceramic materials with high hardness and high wear resistance. For fine turning of industrial ceramic materials, natural single crystal diamond tools are used, and micro-cutting is used for cutting. Due to the high hardness and brittleness of ceramic materials, turning processing is not widely used, and it is basically still in the research stage.



ceramic blade



2. Precision machining method of ceramic blade - grinding



Grinding of ceramic materials is one of the most widely used processing methods at present. The grinding wheel used for grinding is generally a diamond grinding wheel.



The grinding fluid is selected with good cleaning performance and low viscosity; after grinding, the surface of the precision ceramics will have a certain degree of smoothness, and the working efficiency of grinding is high.



ceramic blade



3. Ceramic blade precision machining method - grinding and polishing



In some areas of industrial production, grinding alone cannot meet the surface finish requirements of ceramic parts, and grinding and polishing are usually used.



On the other hand, ceramic materials have low toughness and high brittleness, and their strength is easily affected by surface cracks.

与此原文有关的更多信息要查看其他翻译信息，您必须输入相应原文