[sales-manager301@wococarbide.com]Brief Introduction of carbide round rod 2

       

Cemented carbide bars are characterized by stable mechanical properties, easy welding, high wear resistance and high impact resistance.

Carbide bar is mainly used for drill, end milling cutter and reamer.

It can also be used for cutting, stamping and measuring tools.

It is used in papermaking, packaging, printing, nonferrous metal processing industries.

In addition, it is widely used for machining high speed steel cutting tools, carbide milling cutter, carbide cutting tools, cutting tools of NAS, air tools, carbide drill, milling cutter core bit, high speed steel, taperd milling cutter, the metric system of milling cutter, the micro end milling cutter, hinge, electronic tools, ladder drill, metal cutting saw, double margin drill, a gun, Angle cutter, carbide rotary burrs, carbide cutting tools, etc.

Use the editor

Grade YG6, YG8, YG6X is more wear resistant than MK6, it can be used for hard wood, processing aluminum alloy profiles, brass bars and cast iron, etc., YG10 grade wear resistant, knock resistant, used for processing hard wood, softwood, black metal and non-ferrous metal.

One, two or three holes, 30 - or 40-degree helical straight or twisted, or holeless solids, are used as standards for fabrication.

Submicron grain YG10X end mills, drill bits and cemented carbide bars are mainly used for precision cutting of nonferrous metals and submicron grain YG6X cutting and fiberglass reinforced plastics, titanium alloys, super hardened steel fine grain YG8X, etc.

Cemented carbide rods can be used not only for cutting and drilling tools (e.g., micron, Twiste, and vertical mining tool targets), but also as input pins, various roller wear parts, and structural materials.

In addition, it can be widely used in many fields, such as machinery, chemical industry, petroleum, metallurgy, electronics and defense industry.

The process flow

Carbide sticks belong to the category of carbide cutting tools, which are suitable for different rough grinding parameters, cutting materials and non-metallic materials.

At the same time, carbide bar can also be used in traditional automatic, semi-automatic lathes and so on.

The main technological process with milling and requirements according to the use the formula to the wet grinding, mixing - crushing - drying and sieving to join after forming agent, then to sieve made the mixture, drying granulating to suppress - molding - low pressure sintering, molding (blank) and external circular grinding fine grinding (blank without this procedure) to detect size, packing and warehousing.