[1]Introduction to titanium alloy powder

       product quality

Aviation-grade powder production department strictly controls every production step to ensure product quality. At present, the company has passed ISO9001:2008, AS9100C&ISO9001:2008, ISO/TS16949:2009 and ISO13485:2003 quality management system certification. Under the supervision and guidance of these quality management systems, every production step and management have been well monitored and continued Optimization can not only ensure production efficiency and shipping efficiency, but also ensure product consistency and repeatability.



Retrospective

Each order can be traced back to the raw material bar, which is supplied by a stable supplier, and the supplier is qualified as an aviation supplier.



Process assurance

√ Ensure that the chemical composition of the product meets aerospace and biomedical standards

√ Guarantee high purity (H<0.005%, N<0.01%, C<0.01% wt)

√ Guarantee consistency

√ Guarantee repeatability

√ Ensure the traceability of each production step from raw materials to finished products

√ Provide particle size analysis report, chemical composition analysis report and other test reports required by customers.



Packaging and storage

In order to avoid contamination, the powder is packaged in a glove box protected by argon, and the container used to fill the powder is specially treated before packaging. The packaging container and powder are stored in a clean and dry environment.

Characteristics of titanium

Titanium is an important structural metal developed in the 1950s. Titanium alloys are widely used in various fields because of their high strength, good corrosion resistance, and high heat resistance. The performance of 99.5% industrial pure titanium is: density ρ=4.5g/cubic centimeter, melting point is 1725℃, thermal conductivity λ=15.24W/(mK), tensile strength σb=539MPa, elongation δ=25%, section Shrinkage ψ=25%, elastic modulus E=1.078×105MPa, hardness HB195.

Grades and specifications

■The grades provided include: CP Ti, Ti6Al4V, Ti 6242, TA15, TC11, etc., and other grades of titanium alloy powder can be customized according to customer needs.

■Product standards: AMS 4998, ASTM B348, AMS4919, ASTM F2924, etc.

■Particle size distribution: 0-45, 0-53, 15-45, 45-105, 100-200, 100-350 (µm)

■ Oxygen content: ELI(<1300ppm), 1300 ppm, 1500 ppm, 1600ppm

■Other particle size and oxygen content can be customized according to customer needs